The 2" Rollers - Part 2
Here I used the extra roller I ended up with to set up the lathe to knurl the rollers. I found the draw across the roller was to slow and had to change some gears to speed it up some, otherwise it would of taken a long time for the tool to move across the roller surface. This is what the roller started to look like after I ran up and down it's length a couple times. I made 4 passes with the live roller and 3 with the dead roller. The finished outcome of the rollers after being knurled. The left one is the dead roller, the right one is the live roller. |
All Content on this site Copyright 1995-2017 by Mirageport Systems All Rights Reserved.